Autodesk Inventor & 3D Cable Harnessing

Autodesk Inventor 3D Cable & Harnessing

The Cable & Harness environment converts symbolic schematics into exact 3D solid representations to evaluate mechanical spatial clearing and exact wire bundle bundle metrics.

📥 Establishing the Link Connection

To accept wiring data generated in AutoCAD Electrical:

Open your main structural assembly file (.iam) inside Inventor.
Navigate to the Environments Tab and click Cable and Harness.
Select Electromechanical Link Setup from the ribbon toolbar.
Link to the matching .emx tracking file generated by the schematic workflow.

🗺️ Execution/Routing Protocols

Once the link establishes connection parity, follow this routing workflow:

Step 1: Component Definition Mapping

Ensure electrical pins on components match your schematic labels. Right-click parts inside Inventor to change their properties to match the schematic reference tags (e.g., PB101).

Step 2: Path Generation

Use the Create Segment tool to define the physical layout path where wire bundles are allowed to travel across your system frames.

Step 3: Wire Imports & Routing

Click Import Wire List to draw in schematic definitions automatically if utilizing the manual option, or pull directly from the active live link.
Execute the Automatic Route function. Wires will automatically find the shortest pathway through your pre-defined segments.

Step 4: True Bundle Length Reports

Run the harness report generator to calculate the exact physical length of wires for production cutting, including specific service loop slack adjustments.